Xtar WP2 II Smart Li-ion Charger for 18650, 18500, 18350,14500, 16340 3.7V Li-ion Batteries

Xtar WP2 II, two charging speeds li-ion battery charger. Two independent charging channels (1A or 0.5A per channel controlled by built in switch). 

USB port for charging portable devices such as Iphone. Now you can use only one fully charged 18650 cell, and charge your iPhone direct from this charger.Very useful when power source is not available.

Two charging speeds: 1000mA (Fast), and 500mA (Slow). Car adapter- included.

XTAR WP2 II Li-ion battery charger is compatible with following 3.7V lithium-ion battery cells:

• 14500/ 14650/ 17670/ 18500/ 18650/ 18700/ - No Spacers needed
• 18350/10440/16340 (RCR123) - Two spacers needed per one charging slot

Charging Specifications:

Operational Temperature: 0~40℃

Input AC: 12V DC: 1000mA

500mA CC Current:  500m A±5%

1000 A CC Current: 1000m A±5%

Cut-Off Voltage:  4.2±0.05V

CV Cut-off Current:  <100mA

Standby Current:  <20.0m A

TC Current (Battery Volt 2.0~3.0V):  80±20m A

Auto Recharging Threshold Value Voltage:  3.9±0.15V

USB Discharging Specifications:

Operational Temperature: 0~40℃

USB Interface Output Floating Voltage: 5.0V

Output Floating Voltage Ripple: <120 mV

Reactive Current: <10m A

Maximum Output Current: 500mA 

Battery Output Cut-off Voltage: 2.80±0.15V

Content:

What you see on the pictures above is exactly what you will get.

1x Charging unit WP2 - II (latest revision-Orbtronic is authorized Xtar dealer and you will always get the newest Xtar products)

1x Wall Outlet 110V/220V Power Adapter

1x 12V Car Adapter

1x User Manual 

2x spacers (extensions for smaller batteries)

Highly recommended 18650 3100mAh (Panasonic 18650 NCR18650A inside) Li-ion (Dual Protected) Orbtronic batteries you can buy as well, and we can ship them together with WP2 II charger.

Notice:

Smaller size (RCR123, also called 16340) batteries will need 4 contact spacers in order to make proper battery charging connection. Very easy to install=screw in thread design. Extra spacers are available to order at our Orbtronic store.

Quick Xtar WP2 II Switch position guide:

For Li-ion batteries rated 1200mAh, and more - set the switch to 1A

For Li-ion batteries rated less than 1200mAh - set the switch to 0.5A

Switch position 0 is for charging portable devices such as iPhone from WP2 II charger (via USB charging cable- not included). Use fully charged 18650 battery only. Battery must be placed in left charging slot. Portable devices that need more than 500mA charging current are not compatible.